Plasma engine open source invention atomic fusion BLEVE HHO

The plasma engine open source patent

The plasma engine at it's core is an electric engine as opposed to an electric motor.  The plasma engine uses an electric discharge to create an expansion (such as but not limited to an explosion) of any material.  This material may include, but not limited to, converting a liquid to a gas.  For water a theoretical maximum could be a 1600x volume expansion from a bleve effect, plus possibly more from combustion of the constituent gasses, and even more when considering temperature effects.  Fusion may also occur.  Magnetic unity principles can be used in this device(s) and may help achieve fusion.  Fusion can serve any use, especially to superheat the products to cause more, or in any way improved, expansion.  Components in the device, and/or outside the device and/material may convert and/or store and/or assist in converting or storing fusion energy and any other energy of all types from the device and/or material into work, heat, or any other form of energy.  Magnetic fields and/or pulsed magnetic fields and/or moving or apparently moving magnetic fields (magnetic unity) may also enhance the ability of the material to vaporize, lubricate, dissociate, ionize, fuse, etc.

The electric discharge can be created by any method but preferably a capacitor or capacitor bank connected to high surface area electrodes in the expansion chamber(s).  This capacitor bank may or may not be connected to a means of charging it such as batterie(s) and/or any other method.

This engine can be any design that utilizes expansion chamber(s) with one or multiple stages where material is expanded by electrical discharge. It could even be a converted gas or diesel engine or a new engine or anything else.  The expansion chamber could even be ethereal like water or earth atmosphere or space (photon field) or a magnetic field.  Earths atmosohere could be the expansion chamber of a rocket or jet, water could be the expansion chamber for a water rocket or jet, space in general for any type of craft, and a magnetic field or magnetic unity field could be the expansion chamber for spacecraft.

For a rocket like propulsion, material such as but not limited to water based fuel, can be directed into a plasma ignition chamber where the water is at least vaporized and preferably also separated into hydrogen and oxygen and/or other gasses depending on the fuel and preferably also combusted and/or ionized and preferably also fused into higher elements.  For anything but especially spacecraft, magnetic unity principles can be used to contain the expanding gasses since there is no atmosphere to accomplish this containment in space.  A magnet and/or magnetic unity can also be used in the plasma ignition chamber to aid in anything especially volitalization, electrolysis, ionization, combustion, and/or fusion.

This could also be used for gun-like projectile launching devices.  Some say 6kv .1 microfarad capacitor can create a very explosive shockwave.  Distilled water has a very high dielectric constant and would be great to use to increase capacitance.

At it's simplest this engine could run off of water and electricity, preferably distilled water to prevent corrosion.  Efficiency of this engine may approach or exceed that of an electric motor if only using the BLEVE effect.  But if the water molecules are split releasing hydrogen and oxygen, perhaps much more energy can be liberated by the combustion of these byproducts.  Fusion can release even more energy in a variety of forms, any or all of which may be utilized if desired.

However I feel that the real power of this invention is to create a true fuel-electric hybrid.  And to realize this would be to use something as a fuel that contains more energy than water alone.  This fuel can be anything but preferably a water soluble fuel.  As a water soluble fuel more energy can be added by any method but preferably a carbon based water soluble fuel like graphene or humic/fulvic acid.  Another preferable option could be any emulsified fatty acid such as soap.  Also anything else such as but not limitedlto glycerine, ethanol, methanol, ethylene/propylene glycol, etc.  When the plasma is formed by one of these solutions, not only do the additives reduce the surface tension possibly and help get a fuller expansion effect, but also add energy to the solution that may or may not be released by the plasma in any process such as combustion.  They also may effect the dielctric constant.

Electrolytes may be used to increase conductivity of the solution if desired or any other purpose.

This technology can have any application such as but not limited to: creating rotary motion for any purpose, creating linear motion for any purpose, rockets, cars, planes, boats, watercraft, guns, rockets(underwater or atmospheric), spacecraft, trains, submersibles, robots, any type of transportation, any form of energy generation and/or storage, generating plasma and/or shockwaves for any use, etc.


How to travel faster than the speed of light by rarefying space

Ah yes the speed limit of the speed of light.

It was just discovered that by slowing down photons sufficiently they stick together.  Researchers say that this can create photon molecules.  What they don't yet realize is that these stuck together photons already exist around us and through us and we cannot sense them since they are not moving!  We can only detect photons when they are moving.  This field of stuck together photons is called Space or the Aether.

Can we disrupt space so that we can break the speed limit of the speed of light?  Easily.  Once you discover the root cause of a problem you are 99% closer to solving it.  Well now that we know what space is exactly we can easily disrupt it.  Photons are suseptible to magnetic fields.  What we can do locally is use high frequency pulsed magnetic fields or principles of Magnetic Unity (see previous posts) to dissolve this molecular matrix of photons and slide through it without having to ride it.  It is like the difference of surfing versus a torpedo.  Surfing you are limited by the water wave propogation speed (analogous to the speed of light) but if you can part the hydrogen bonds of water (analogous to dissolving or rarefying the photon field of space) you can travel through space, not "on top of it" and go much faster than the wave propogation speed.  Just be careful whatever you do that you don't slide into the center of the earth (like what happened in the philadelphia experiment)!  Also you will need protection from the field in the form of a capsule that has alternating layers of superconductor and ferromagnetic material.  A simple iteration of this is copper sheeting and iron sheeting cooled with liquid nitrogen.


Ambient Atmospheric Triboelectric Generator - Tribogon - open source hardware patent

*Update May 2 3018:  This technology can be used and calibrated to be an electrostatic charging potential of the air (or any medium like water) sensor.  This could be useful anywhere but especially in explosives industry to monitor and/or adjust the risk of explosions from built up charge.  If this sensor charges up in voltage fast it means that the atmosphere is bad at neutralizing charges.  To achieve this monitering it can be done any way but one interesting way is to link it to a small portable computer like an arduino.  The data can be sent and/or stored any way but especially wirelessly to a display device would be ideal.  The data could be presented in any way but especially converted to a new measurement unit such as but not limited to ECP (Electrostatic charging potential).  This unit can be defined as a voltage charging rate of a sensor with defined attributes like material selection, thicknesses, assembly method, surface area, etc.*

Herin is described a method to make a triboelectric generator that generates electricity under ambient atmospheric conditions and also a method to make highly optimized triboelectric generating structures from a single shape panel or many shapes or large pieces as a skin.  This idea was inspired by the way the egyptian pyramids functioned as triboelectric generators and also the natural pyramids that inspired the egyptians to use the shape to electrically pull groundwater to the surface of the earth.  Recently research into triboelectric nanogenerators revealed that pyramids are the optimum shape for triboelectric surfaces.

The Seked.  It is the building block of a modern pyramid.  This shape can be used to tessellate and make the entire surface of a pyramid.  The optimized shape is likely defined as a right triangle whose perpendicular sides are a ratio; 1 and 1.618034. This is roughly the values of the Great Pyramid and is the golden ratio.  This right triangle can be used as panels to create a pyramid structure.  Any shape can be used for this triboelectric generator but the seked may be optimum for many uses.  Left and Right handed versions would be required if a golden seked is used.

This panel should  be able to connect to other panels electrically and perhaps mechanically, but this is not required.  This panel by virtue of its shape can be used to create small pyramids that are a part of the surface of large pyramids, a sort of fractal design if desired.  This can even be used in ambient or high relative motion underwater conditions or in air or elevated above the earth at any altitude even space if desired if certain design considerations like sealing out the elements are taken.

The panel would consist of a layer of thin preferably Teflon PTFE or any other triboelectric material including metals, metaloids, non-metals, semiconductor, mixtures, compounds, molecules, etc or mixtures or combinations therof, in crystalline, amorphous or any other form; preferably .001 thick, but any thickness would work.  What this teflon or any other material layer does is collect charges from the atmosphere or water or anything else.  This layer may or may not contain other materials like carbon to make it conductive or anything else.  This layer may or may not be, but preferably would be, joined tightly to a current collector such as a metal or carbon based sheet.  This joining may include preferably barium titanate and/or carbon of some size mixed with a binder (or no binder) to adhere if desired the teflon with the conductive sheet preferably copper or copper mesh.  If a binder (glue) is used preferably the binder will set while pressure is being applied as to assure a very close contact.  Or if no binder is used a mechanical framing can be used to apply pressure to the contact if desired.  Instead of the conductive sheet a transparent conductor can be used like indium tin oxide.  A transparent current collector would be good if this was used over the top of solar cells.  There would be a dielectric and then another conductive layer.  Binders and other materials may or may not be used between any or all layers.  This is basically a triboelectric energy harvesting capacitor.  The dielectric can be anything but preferably a mixture of barium titanate and epoxy, thinnest layer possible that prevents electrical conduction between the conductive layers.  Multiple of these capacitance layers can be used.  The charge acquired by triboelectricity is temporarily stored in it's inherent capacitance.  So the minimal amount of layers are triboelectric material, current collector (optional but desired), dielectric, current collector; but a baseplate, preferably polycarbonate can also be used for stability and mounting purposes among other uses.  The two conductive layers can be connected to a capacitor and/or battery to "store" acquired charge.  This connection may or may not use diodes.  If diodes are not used then when the capacitor charges to a high enough voltage the panels dielectric may breakdown and short the panel.  Also these panels can be connected to each-other to increase the area of energy harvesting and intrinsic capacitance.  This connection can be made in any way but preferably would include a resistor on the order of 100 ohm to 1 Mega-ohm so that dangerous large sparks cannot be produced from discharge.  The larger the resistance used the better the intrinsic capacitor needs to be so that it can acquire a high charge without dissipating.  The connection between panels can be made with wire and connectors or even mechanically by conductive surfaces as the panels are placed together or near each-other.  Alternatively they could be connected by way of a shared "baseplate" that multiple panels are placed on or connected to.

The teflon surface itself or the assembly in general can be flat or even include small shapes such as pyramids (circular pyramids or any number of straight sides like square pyramids) stamped into the plastic or panel or made any other way.  Micro/nano pyramids can also be created on the surface of the PTFE teflon by corona discharge treating the surface preferably with a wattage of over 100W in order to make the surface superhydrophobic.  This creates micro pyramid like structures on the surface and will greatly enhance the triboelectric generating potential. For joining the seams between panels and perhaps even the edges of the individual panels themselves a surface protection teflon tape can be used if desired.

This technology can be used for any use, from panels for houses to building scale pyramid models, to energy harvesting groups of structures, to smooth skins for cars, planes, and boats.  It can be used in high, medium, or low atmospheric agitation. Any application of this technology is possible and covered under this open source invention.

Example purchase list and calculations:

185.8312 m height of piece 7316.189 in 11.001 (1:665 scale) <<11">>
115.1833 m leg of piece 4534.776 in 6.819 (1:665 scale) <<6.8">>
1.618034 golden ratio

.002 thick teflon


1/2" teflon tape

Steel for press

rubber for pressing on teflon

1 mil copper

Screen printing frame

Silk screen material


epoxy for PTFE

Barium Titanate

Barium Carbonate


Trump needs to be impeached for launching Syrian War

Wow.  I can't say I'm surprised but I am shocked by what Trump just did.  I thought he was backing off his rhetoric with the "I never said when we would strike!" thing.  But apparently my hope was in vain.  There exists NO EVIDENCE that Assad launched the chemical weapons!  The last time we sent missiles against Syria for using "sarin gas" there still exists to this day NO EVIDENCE that Assad or the Syrian government at all launched the attack!  This was just  announced by Mattis on Feb 2nd!  

If Trump and may and Macron have some "secret evidence" (worked great with "weapons of mass destruction" and "sarin gas attacks" right??) They better f'ing make that evidence public before launching an attack.  That is the LEAST they could do.  In reality the constitution DICTATES that the president CAN ONLY DIRECT THE MILITARY AFTER CONGRESS DECLARES WAR!!! Article I section 8 clause 11.  ANY PRESIDENT THAT LAUNCHES A "MILITARY STRIKE" without congressional approval MUST BE IMPEACHED.  End of story.  Russia would be fully justified to sink any ship that is proved to have launched missiles at bases in Syria.  I hope they don't make the same mistake as Trump and wait until there is public proof as to the identity of the ships that launched the attack.  I wouldn't want to be in the military or large strategic population centers in America right about now as Russia sinking our warships will certainly trigger a WORLD WAR.  Make no mistake, Russia isn't going to turn a blind eye even if no Russians were killed, the way the west has treated Russia has brought Russia to the absolute edge and like a cornered cat they will fight with everything and I mean everything they have even if there is no chance they can win.  You push someone to the edge unjustly like the west has pushed Russia and they will not only risk but sacrifice their lives and the very existence of their country to fight back in TOTAL WAR.

The Unified Theory of Everything, Unified Field Theory

I'm sure you could tell this was coming.  I figured out the unified theory of everything.  So here goes.

"Light" is the elementary particle, at least in our realm of existence there is nothing more basic.  The photon.  So how do photons create matter, the end game?  Quite simply.

Photons orbit.  When photons orbit you create an electron.  An electron is simply orbiting photon(s), nothing more nothing less.  An electron is just a field.  So we could say that electrons as a particle don't even exist.  Electrons are just a little electric field.  So now what do we get when we  have an orbiting electric field (an orbiting electron)?   We get a magnetic field or what I like to call a "magneton".  So we have that.  I will postulate that protium (the simplest hydrogen atom) is a simple magneton.  An orbiting electron is not yet enough to create physical matter.  I think we can define physical matter as something that has weight; inertia that repels a physical force.  So we have a magnetic field, a protium.  And based on this theory I will propose that protium alone does not have physically measurable mass.  People say it has mass but I have yet heard of an experiment that can measure this mass physically.  Now how do we create matter?  Well we have to have an orbiting magneton.  An orbiting magneton is an genoton, also known as a "genotic field", others call it an atom.  It is named geno- for birth or beginning and -ton for small.  Orbiting magnetons, or we can say orbiting protiums, which creates genotons (or atoms), is how matter is generated.  Whether these protiums are rotating around each-other like H2 molecules, or if they attract other magnetons by magnetic attraction (strong nuclear force) and spin around each-other as an atomic nucleus, either way is how matter is generated.  A genoton is a physical object in our world.  This is why atoms are the smallest building blocks of matter, because they are the minimum requirement to "exist" in the physical world...and may be created by as few as two photons.

Knowing this unified field theory, we can use it to create new matter, or destroy the physical world.  But such is any technology, able to be used for good or evil.

-Strong nuclear force likely is magnetic, follows inverse cubed law:


Why people were "mummified" in Ancient Egypt and Inca

Why mummies?  Well the fire in Trump tower revealed the answer to me.  The victim in the fire suffered severe burns and was taken to the hospital but died.  It got me thinking how could we keep these burn victims alive?  Well the thought was to wrap them up right?  Like a mummy?  Oh crap.  What if ancient mummies actually were burn victims?

The answer is that yes they were burn victims.  But how did they get burned?  Remember my last post on how the pyramids work and what do they do?  The pyramid was a giant capacitor.  Anyone at the wrong place at the wrong time around a pyramid or who walked up and touched a pyramid, would get shocked with likely millions of volts.  So could mummies have been struck by this "lightning"?  I did some web searching to see if I could find out.  Here are some links to read through.  One talks of high expression of transglutaminase which is elevated in burn victims, also DMBT-1 which is elevated in infections, and burn victims, if kept alive, will have to fight infections.  Also mummies are covered in bitumen before wrapped so that would make sense as the bitumen would help seal the wounds.

But what really made me drop the mic was this quote in an Inca mummy research "One of the mummies appears to have been struck by lightning".  Wow.  And we know the incan's also had pyramids.  What are the chances that mummies always go along with pyramids, no matter where the pyramids happen to be located?  Also likely people don't notice that egyptian mummies "appear to be struck by lightning" because they are so much older than the Incan mummies and the skin doesn't show the burn marks since it is aged and darkened.

In conclusion I can say with 95%+ confidence  (usually the level at which I "believe" a theory) that ancient mummies were in fact burn victims likely of "priests" and "priestesses" who had the role in society to tend the pyramid duties, much like the priests in Israel had the duty of tending the Arc of the Covenant, and could get electrocuted if they didn't follow protocol.  If they got struck, they would coat the burns in bitumen and wrap them in linens.  They made up a mythology to ease the grieving in society by saying that it was "the will of the gods" and that they would have a special place in the afterlife.  But once people wised up they probably wanted to decommission the pyramids to prevent these tragedies from happening anymore.  But that is what the homo capensis would have wanted...since the pyramids also posed an incredible risk to their levitation craft.

protien expression

acute phase protien

transglutaminase burn healing

struck by lightning


How the pyramids work: Triboelectric generators of electricity

So I finally figured out what pyramids do and how they work.  They generate electricity based on triboelectricity.  Triboelectricity is generated from rubbing dissimilar materials together.  Basically you make static electricity.  Pyramids are optimized shapes for generating this electricity from air.  4 sides and 51.5 degree angle with the ground; and oriented towards the prevailing wind (north in the case of egypt) Basically what you are doing is forcing the air to deflect off of a surface no matter which way the wind is blowing.  The harder the deflection the more electrons you can steal from air.  

Basically you want two things for the coating of the pyramid, very electronegative elements (negative on the triboelectric series) and conductive so you can accumulate and transmit the charge.  The best thing is Teflon to coat the pyramid with since it is ultra low near -200 on the triboelectric series.  However this charge cannot be stored since it isn't conductive.  This is why food doesn't stick to teflon because it steals electrons from your food but since the electrons stay stuck to the teflon and aren't conducted away, the newly acquired electrons repel your food.  So this is bad since we want to harvest the electrons.  Well two other elements are also quite electronegative; carbon and precious metals especially gold.  Copper is a great conductor  and also pretty electronegative.  So we can make a paint that includes PTFE (teflon) powder, graphite powder, and copper powder.  The binder can be liquid latex which is also good at stealing charge.  The paint should not be dilute, because the graphite and copper need to be closely compacted together to transmit electricity.  Ideally you would mix the teflon powder, say 50% with 25% copper powder and 25% graphite powder, sinter that mixture together, and then grind that into a powder and use that by adding that to the liquid latex.  But if that is too much work you can just mix 25% teflon powder with 25% copper powder, 25% graphite powder and roughly 25% liquid latex.  After painted on it should be heat treated to help contract everything together and improve conductivity.  You should use an ohm meter to check.  Another idea is 2 layers of paint; first apply a layer of copper powder with just enough liquid latex mixed in to adhere, then heat treat this with a heat gun, then apply a second layer using 50% graphite and 50% ptfe powder and just enough liquid lates to allow it to adhere, then heat treat this layer with a heat gun.  Make sure your method avoids the formation of cracks in the paint.  The layers should be as thin as possible.

Now the pyramids were made from limestone blocks which is conductive and therefore can conduct charge for us.  Lime mortar is a great way to build our pyramid, and should be made with the minumum amount of water and compacted down if possible, or make the mortar into compacted bricks/blocks and use a thin layer of clay as mortar between the blocks.  The key here is we want it as conductive as possible, so we can use charcoal chunks as filler material in the lime mortar, and also coil or strew some bare copper wire (no insulation) around the mix as well.  The key here is we want to transfer all the charge to the base of the pyramid described below (the top copper sheet).

The pyramid should be insulated from ground.  The pyramids used Basalt as foundation material, and basalt is a much better electrical insulator than even fiberglass.  On top of that basalt layer (so contacting the pyramid) ideally you will have a very conductive plate or sheeting like copper.  This Basalt insulator is key so that the pyramids charge can be stored and not bleed off to ground.  Below the basalt you should have another sheet of copper.  Water will naturally be drawn from the ground toward the charged pyramid just like water in your faucet is drawn to a charged comb: and you have a passive water pump if you so choose.  However, you want to prevent the water from infiltrating cracks in your basalt layer, because if the water touches the top conductive layer (copper sheet) of your pyramid it will discharge the stored electricity. Also you can charge a capacitor or battery by connecting the top copper sheet to one end of a capacitor, and the bottom copper sheet to the other end of the capacitor.  The top copper sheet is your negative electrode and the bottom copper sheet is your positive.

And there you have it.  The pyramid is twofold, a triboelectric generator and a basic capacitor all in one.  Also a well.  And now you know how the pyramid works and why they were built all across the world.

WARNING:  During a sandstorm your pyramid will generate MUCH more electricity than normal!  This is because the sand striking the pyramid will give us much more electricity than air alone.  Stand clear, because if you touch the pyramid, it may kill you like the Ark of the Covenant!


The mark of the beast will be invisible: Don't get it!

The mark of the beast will be an invisible 3D QR code that will be tattooed onto the hand or forehead.  It will use primarily invisible IR (infared) ink mixed with tiny wafers or crystals of gallium arsenide or indium gallium arsenide.  An infrared detector will be used to read it.  The wafers will be excited with an electromagnetic field or pulse in which the gallium arsenide will emit a characteristic IR frequency of roughly 830 or 870 nm.  Since the depth of the crystals, size of the crystals, and location of the crystals will be randomly distributed, it will be virtually impossible to replicate.  When you get the mark they will need two forms of biometric id, likely facial recognition and fingerprint recognition or DNA sample in the case of children.  That way in case the mark was ever removed and stolen, your true identity can be verified and you could get a new mark.  Thieves could take a graft of your skin and keep it alive in cell culture media and/or graft it onto an animal.  This is because the infrared detector can tell if the tissue is dead by heat signatures.  They could even look at blood vessels to make sure grafts couldn't work, but I doubt that security will be included at least at first.

The 2D infrared QR code will be your unique public key, and the unique 3D locations of the crystals will be hashed into your un-replicable private key to verify your identity and sign your transactions.

So why not get it?  Well besides the obvious reasons like violating your 4th amendment right and your biblical mandate not to get it, it is also toxic.  Every time you are scanned some gallium arsenide will break down and enter your body.  Arsenic has the tendency to cause malignant sores across your body.  "Killing the chip" by zapping it with high power will also release large amounts of the arsenic and may even kill so that should not be done.  Criminals will likely try to exploit this fact as well.  To remove the mark safely it would have to be done surgically.  Also the government and/or corporations will know your private key and can use it or shut it down.  It will just require that the peons, you and me, would have to present the mark to be verified in order to allow your private key to work.  You may know your private key but likely you wouldn't be able to use it directly to authorize purchases, you would have to display the mark.  So it isn't as empowering as it seems because the government and/or corporations would know your private key, could steal your money for taxes or whatnot, even shut down your account because they can bypass the security built into the mark and just use your private key directly.  Sounds fair eh?  And you thought the airport scanners made you feel naked...